Make sure this part fits

Mopar 4885206AB
Door Actuator

2001-2017 Mopar 4885206AB

Customer Questions & Expert Answers (9)
Mopar 4885206AB Door Actuator
Mopar 4885206AB Door Actuator
  • Part Description
    Actuator - A/C And Heater; HVAC Air Adjustment Control Motor; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator
  • Manufacturer
    Mopar
Make sure this part fits
$137.09 MSRP: $202.00
You Save: $64.91 (33%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2009 Chrysler AspenLimited, Limited Hybrid8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
    2001-2006 Chrysler SebringBase, GTC, LX, LXi, Limited, TSi, Touring4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
    2001-2009 Dodge DurangoAdventurer, Base, Limited, Limited Hybrid, R/T, SE, SLT, SLT Plus, ST, SXT, Sport6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
    2002-2008 Dodge Ram 1500Laramie, SLT, SRT-10, ST, SXT, Sport, TRX410 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
    2003-2009 Dodge Ram 2500Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX410 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
    2003-2009 Dodge Ram 3500Laramie, SLT, ST, SXT, Sport, TRX410 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
    2001-2006 Dodge StratusES, R/T, SE, SE Plus, SXT4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
    2015-2017, 2008-2010, 2003-2006 Dodge ViperACR, Base, GT, GTC, GTS, SRT-10, SRT-10 ACR10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Any idea if 4885206AB will fit my car? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 4885206AB, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    What should be done for a single zone heating-A/C system for the 2009 Chrysler Aspen? Posted by Customer
    A:
    Disconnect the negative battery cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Blend Door Actuator
    Q:
    What is the first step to replace the blend door actuator for the 2001 Chrysler Sebring? Posted by Customer
    A:
    First, re-calibrate the HVAC actuator by disconnecting the negative battery cable for 60 seconds.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Blend Door Actuator
    Q:
    What is the first step to service and repair the rear blend door actuator for the 2008 Dodge Durango? Posted by Customer
    A:
    Position the rear blend door actuator onto the side of the rear HVAC housing.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Blend Door Actuator
    Q:
    How do you remove the blend door actuator for the 2005 Dodge Ram 1500? Posted by Customer
    A:
    Unscrew the two screws securing the blend door actuator and bracket assembly to the top of the HVAC housing, then remove the assembly while disconnecting the HVAC wire harness connector from the actuator.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Blend Door Actuator
    Q:
    What are the initial steps for removing the blend door actuator on the dual zone passenger side for the 2006 Dodge Ram 2500? Posted by Customer
    A:
    Disconnect the negative battery cable and remove the instrument panel.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Blend Door Actuator
    Q:
    How do you install the blend door actuator for the dual zone passenger side for the 2009 Dodge Ram 3500? Posted by Customer
    A:
    Install the blend door actuator and bracket assembly onto the top of the HVAC housing, securing it with screws tightened to 1.1 Nm (10 in. lbs.), and connect the HVAC wire harness connector to the actuator.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Blend Door Actuator
    Q:
    How is the blend door actuator secured to the HVAC housing for the 2008 Dodge Viper? Posted by Customer
    A:
    The blend door actuator is secured to the HVAC housing using screws, which should be tightened to 2 Nm (17 in. lbs.).
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Blend Door Actuator
    Q:
    What should be done with the actuator retaining screws for the 2002 Dodge Stratus? Posted by Customer
    A:
    Remove the actuator retaining screws.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Blend Door Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Door Actuator 4885206AB Designed for Proper Fit and Performance

The Mopar part 4885206AB Door Actuator comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar Blend Door Actuator component functions as a reliable support element for essential vehicle systems through its engineered design. This part 4885206AB Door Actuator supports Dodge Ram 1500, Durango, Viper alongside Chrysler Sebring, Aspen. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 4885206AB. The authentic Mopar component produced by Mopar functions as a Actuator - A/C And Heater; HVAC Air Adjustment Control Motor; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator.
The part 4885206AB uses durable material for construction and it weighs 0.70 Pounds while its dimensions are 1.9 x 3.6 x 4.2 inches. The product is offered in New condition and functions as a Direct Replacement part to maintain vehicle compatibility and it also known by the names Actuator; Servo; A/C and Heater Actuator with Bracket, Lever, and Recirculation Door.. This part 4885206AB is necessary for every vehicle. The inventory system lists this product with SKU: 4885206AB. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.