Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Mopar 4792692AB
Crankshaft

1999-2010 Mopar 4792692AB

Customer Questions & Expert Answers (14)
Mopar 4792692AB Crankshaft
  • Part Description
    Crankshft
  • Replaces
    4792692AC, 4792177, 4792692AA
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 4792692AB Crankshaft is Ref No. 33 in the diagram below

    2001 Chrysler Prowler Crankshaft Diagram for 4792692AB
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 4792692AB

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2010 Chrysler 300Limited, S, Signature Series, Touring6 Cyl 3.5 L GAS
    1999-2004 Chrysler 300MBase, Pro-Am, Special6 Cyl 3.5 L GAS
    2002-2004 Chrysler ConcordeLXi, Limited6 Cyl 3.5 L GAS
    1999-2001 Chrysler LHSBase6 Cyl 3.5 L GAS
    2004-2006 Chrysler PacificaBase, Limited, Touring6 Cyl 3.5 L GAS
    2001-2002 Chrysler ProwlerBase6 Cyl 3.5 L GAS
    2007-2010 Chrysler SebringLimited6 Cyl 3.5 L GAS
    2008-2010 Dodge AvengerR/T6 Cyl 3.5 L GAS
    2009-2010 Dodge ChallengerSE6 Cyl 3.5 L GAS
    2006-2010 Dodge ChargerBase, Pursuit, SE, SXT6 Cyl 3.5 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Any idea if 4792692AB will fit my car? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 4792692AB, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    What is the sequence for tightening the main bearing cap bolts for the 2009 Chrysler 300? Posted by Customer
    A:
    First the inner main cap bolts, then the windage tray bolts, and lastly the main cap tie bolts.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft
    Q:
    What is the next step after measuring side clearance for the 2003 Chrysler 300M? Posted by Customer
    A:
    Install the windage tray, lubricate its bolts, and tighten to 27 Nm (20 ft. lbs.) plus 1/4 turn.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft
    Q:
    What should be removed after the timing chain cover for the 2003 Chrysler Concorde? Posted by Customer
    A:
    The primary timing chain, crankshaft sprocket, oil pump, and crankshaft rear oil seal retainer, then take out the structural windage tray.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft
    Q:
    What is the sequence for tightening the main cap bolts for the 2000 Chrysler LHS? Posted by Customer
    A:
    First the inner main cap bolts, then the windage tray bolts, and lastly the main cap tie bolts.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft
    Q:
    What should be done with the main bearing caps for the 2006 Chrysler Pacifica? Posted by Customer
    A:
    Remove them, mark them, and note that they are also not interchangeable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft
    Q:
    What should be done with the windage tray for the 2002 Chrysler Prowler? Posted by Customer
    A:
    Install it, lubricate the bolts, and tighten them to 27 Nm + 1/4 turn.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft
    Q:
    How is the crankshaft supported for the 2009 Chrysler Sebring? Posted by Customer
    A:
    The crankshaft is supported in five main bearings, with all upper bearing shells in the crankcase featuring oil grooves and holes, while the lower bearing shells are smooth.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft
    Q:
    How should the thrust bearings be installed for the 2009 Dodge Avenger? Posted by Customer
    A:
    Lightly apply trans gel to the thrust bearings, ensuring they are installed with notches facing the crankshaft, and install them in the block without getting oil on the ladder frame mating surface.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft
    Q:
    What should be done with the main bearing caps for the 2010 Dodge Challenger? Posted by Customer
    A:
    Remove the main bearing caps, ensuring they are also marked for correct assembly and location.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft
    Q:
    What components should be installed after the main cap tie bolts for the 2007 Dodge Charger? Posted by Customer
    A:
    Install the rear crankshaft oil seal retainer and oil seal assembly, followed by the oil pump assembly.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft
    Q:
    What components should be installed after the main cap tie bolts for the 2007 Dodge Magnum? Posted by Customer
    A:
    Install the rear crankshaft oil seal retainer and oil seal assembly, followed by the oil pump assembly.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft
    Q:
    What is the final step in removing the crankshaft for the 2009 Dodge Journey? Posted by Customer
    A:
    Remove the crankshaft from the cylinder block.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft
    Q:
    What is the final step after reinstalling the engine assembly for the 2002 Dodge Intrepid? Posted by Customer
    A:
    Fill the engine crankcase with the appropriate oil to the correct level.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Crankshaft 4792692AB Designed for Proper Fit and Performance

The Mopar part 4792692AB Crankshaft comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar Crankshaft component functions as a reliable support element for essential vehicle systems through its engineered design. This part 4792692AB Crankshaft supports Dodge Charger, Challenger, Journey alongside Chrysler 300, Pacifica, Concorde. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 4792692AB. The authentic Mopar component produced by Mopar functions as a Crankshft.
The part 4792692AB uses durable material for construction and it weighs 56.60 Pounds while its dimensions are 22.3 x 8.4 x 7.7 inches. The product is offered in New condition and functions as a Direct Replacement part to maintain vehicle compatibility. This product functions as a substitute for 4792692AC, 4792177, 4792692AA. This part 4792692AB is necessary for every vehicle. The inventory system lists this product with SKU: 4792692AB. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.