Make sure this part fits

Mopar 4782740AD
Knuckle, Front Passenger Side

2005-2010 Mopar 4782740AD

Customer Questions & Expert Answers (5)
Mopar 4782740AD Knuckle, Front Passenger Side
  • Part Description
    Knuckle - Front; Steering Knuckle, Front Right
  • Position
    Front Passenger Side
  • Replaces
    4782740AB, 4782740AC, 4782740AA
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2010 Chrysler 300Base, C, C SRT8, LX, Limited, S, Signature Series, Touring6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
    2009-2010 Dodge ChallengerR/T, SE, SRT86 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
    2006-2010 Dodge ChargerBase, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
    2005-2008 Dodge MagnumR/T, SE, SRT8, SXT, SXT Special Edition6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Any idea if 4782740AD will fit my car? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 4782740AD, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    What should be done after removing the under-hoist utility jack for the 2008 Chrysler 300? Posted by Customer
    A:
    Insert the end of cable through the rear knuckle and install the mounting screw, tightening it to 8 Nm (71 in. lbs.) torque.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Knuckle
    Q:
    How do you handle the tension strut ball joint stud for the 2009 Dodge Challenger? Posted by Customer
    A:
    Loosen the nut attaching the tension strut ball joint stud to the knuckle, back it off until it is even with the end of the stud, then use Ball Joint Remover 9360 to separate the tension strut ball joint stud from the knuckle and remove the nut from the end of the tension strut ball joint stud.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Knuckle
    Q:
    What is the first step to install the steering knuckle for the 2008 Dodge Charger? Posted by Customer
    A:
    If a shield is required, position it on the knuckle and secure it with 3 screws tightened to 10 Nm (89 in. lbs.).
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Knuckle
    Q:
    What should you do if a new knuckle sleeve is not installed for the 2008 Dodge Magnum? Posted by Customer
    A:
    Proceed with the next steps.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Knuckle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Knuckle, Front Passenger Side 4782740AD Designed for Proper Fit and Performance

The Mopar part 4782740AD Knuckle, Front Passenger Side comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar Steering Knuckle component functions as a reliable support element for essential vehicle systems through its engineered design. This part 4782740AD Knuckle, Front Passenger Side supports Dodge Charger, Challenger, Magnum alongside Chrysler 300. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 4782740AD. The authentic Mopar component produced by Mopar functions as a Knuckle - Front; Steering Knuckle, Front Right and fits into the Front Passenger Side of the vehicle.
The part 4782740AD uses durable material for construction and it weighs 18.10 Pounds while its dimensions are 20.9 x 8.9 x 8.0 inches. The product is offered in New condition and functions as a Direct Replacement part to maintain vehicle compatibility. This product functions as a substitute for 4782740AB, 4782740AC, 4782740AA. This part 4782740AD is necessary for every vehicle. The inventory system lists this product with SKU: 4782740AD. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.