Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Mopar 4897617AA
Pressure Switch

1997-2006 Mopar 4897617AA

Customer Questions & Expert Answers (12)
Mopar 4897617AA Pressure Switch
Mopar 4897617AA Pressure Switch
Mopar 4897617AA Pressure Switch
Mopar 4897617AA Pressure Switch
Mopar 4897617AA Pressure Switch
  • Part Description
    Switch - A/C High Pressure Cut Off; HVAC Pressure Switch; A/C Compressor Cut-Out; Trinary Switch.
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 2001 Jeep Wrangler Pressure Switch Diagram for 4897617AA
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 4897617AA

  • Vehicle Fitment

    Year Make Model Trim Engine
    1998 Dodge B1500Base6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
    1998 Dodge B2500Base8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
    1998 Dodge B3500Base8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
    2000 Dodge DakotaBase, R/T, SLT, Sport4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
    1998-2001 Dodge DurangoBase, R/T, SLT, SLT Plus, Sport6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
    2000-2002 Dodge Ram 1500Laramie, SLT, ST, Sport, WS6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
    1999-2003 Dodge Ram 1500 VanBase6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
    2000-2002 Dodge Ram 2500Base10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
    1999-2003 Dodge Ram 2500 VanBase6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
    2000-2002 Dodge Ram 3500Base10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Any idea if 4897617AA will fit my car? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 4897617AA, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    What is the next step after installing the new O-ring seal for the 2000 Dodge Dakota? Posted by Customer
    A:
    Install and hand-tighten the low pressure cycling clutch switch onto the accumulator fitting.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this A/C Compressor Cut-Out Switches
    Q:
    What should be done after installing the new O-ring seal for the 2000 Dodge Durango? Posted by Customer
    A:
    Install and tighten the high pressure cut-off switch onto the discharge line fitting.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this A/C Compressor Cut-Out Switches
    Q:
    What type of O-rings should be used for installation for the 2001 Dodge Ram 2500? Posted by Customer
    A:
    Only the specified O-rings made of special material for the R-134a system.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this A/C Compressor Cut-Out Switches
    Q:
    What should be done after installing the A/C pressure transducer for the 2002 Dodge Ram 1500? Posted by Customer
    A:
    Reconnect the wire harness connector for the A/C pressure transducer to the transducer connector receptacle and finally reconnect the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What should be done after disconnecting the battery for the 2001 Dodge Ram 1500 Van? Posted by Customer
    A:
    Unplug the wire harness connector from the high pressure cut-off switch.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this A/C Compressor Cut-Out Switches
    Q:
    How should the high pressure cut-off switch be installed for the 2000 Dodge Ram 2500 Van? Posted by Customer
    A:
    Install and tighten the high pressure cut-off switch on the discharge line fitting to 7.5 Nm (5.5 ft. lbs.).
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this A/C Compressor Cut-Out Switches
    Q:
    What should be done after installing the a/c low pressure switch for the 2001 Dodge Ram 3500? Posted by Customer
    A:
    Plug the wire harness connector into the switch.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this A/C Compressor Cut-Out Switches
    Q:
    How do you remove the high pressure cut-off switch for the 2000 Dodge Ram 3500 Van? Posted by Customer
    A:
    Unscrew the high pressure cut-off switch from the discharge line fitting and remove it from the vehicle, discarding the O-ring seal from the discharge line fitting.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this A/C Compressor Cut-Out Switches
    Q:
    What is the first step to replace the A/C high pressure switch for the 2001 Jeep Cherokee? Posted by Customer
    A:
    Disconnect and isolate the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this A/C Compressor Cut-Out Switches
    Q:
    How should the A/C low pressure switch be installed for the 2002 Jeep Wrangler? Posted by Customer
    A:
    Install and hand-tighten the A/C low pressure switch onto the accumulator fitting.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this A/C Compressor Cut-Out Switches
    Q:
    What is the first step to service the low pressure sensor/switch for the 2001 Jeep Grand Cherokee? Posted by Customer
    A:
    Disconnect and isolate the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this A/C Compressor Cut-Out Switches
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Pressure Switch 4897617AA Designed for Proper Fit and Performance

The Mopar part 4897617AA Pressure Switch comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar HVAC Pressure Switch, A/C Compressor Cut-Out Switches component functions as a reliable support element for essential vehicle systems through its engineered design. This part 4897617AA Pressure Switch supports Jeep Wrangler, Cherokee, Grand Cherokee alongside Dodge Ram 1500, Dakota, Durango. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 4897617AA. The authentic Mopar component produced by Mopar functions as a Switch - A/C High Pressure Cut Off; HVAC Pressure Switch; A/C Compressor Cut-Out; Trinary Switch..
The part 4897617AA uses durable material for construction and it weighs 0.50 Pounds while its dimensions are 1.1 x 1.1 x 2.2 inches. The product is offered in New condition and functions as a Direct Replacement part to maintain vehicle compatibility and it also known by the names Lower Pressure Cut-Off Switch; High Pressure Cut-Off Switch; Switch; Switch A/C High Pressure Cut Off. This part 4897617AA is necessary for every vehicle. The inventory system lists this product with SKU: 4897617AA. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.