2000 Dodge Viper Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2000 Dodge Viper

• Q:

  How Does Clock Spring Play a Role in Diagnosing and Servicing the Airbag System on 2000 Dodge Viper?

  A:

  Before servicing the air bag system, the battery negative cable should be disconnected and wait for two minutes. Using a puller, remove Driver air bag Module & Steering wheel. Access the wiring of the clock spring, replace if faulty and reinstall components. Finally, connect air bag wire and test the system without re-connecting the battery.
• Q:

  How Can the Air Bag Control Module Be Safely Removed and Installed to Prevent Accidental Deployment on 2000 Dodge Viper?

  A:

  Air bag Control Module has impact sensor for deploying air bag. To prevent accidental deployment, it should be bolted to the vehicle before being connected electrically. Always disconnect the battery negative cable and wait two minutes to remove. Follow specific steps for removal as well as installation and make sure to establish proper connections and torque.
• Q:

  What Steps Should Be Taken with an Airbag System Post-Collision on 2000 Dodge Viper?

  A:

  After a collision, handle the air bag system carefully. Keep electrical sources away from the inflator and carry the module with the air bag side away from the body. Disarm the system when servicing related components. Replace air bag modules and the Clock Spring after deployment; other parts should be replaced as needed.