How to Replace a Fog Light Bulb on 2000 Chrysler 300M?

To service the fog lamp bulb, remove the housing screw and pull out the lamp. Take off the rear cover, clip the wire off and remove the bulb. Connect the new bulb, being careful not to touch the glass, and reassemble the housing checking for operation and alignment.

OEM 2000 Chrysler 300M Fog Light Bulb

Fog Lamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fog Light Bulbs found

View related parts
2000 Chrysler 300M Exterior Bulbs Part Number: L00H355W
$14.57 MSRP: $20.75
You Save: $6.18 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb - Fog Lamp; Fog Light Bulbs; Car Bulbs; Fog Lamp Bulb; Bulb; Bulb Fog Lamp H-3 55 Watt
- Replaces: MS820964, L01255H3
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.5 x 2.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L00H355W
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler 300M Submodels:
- Base, Pro-Am, Special | 6 Cyl 3.5 L GAS
View related parts
2000 Chrysler 300M Fog Lamp Bulb Part Number: L0009040
$11.18 MSRP: $12.85
You Save: $1.67 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb - Fog Lamp; Fog Light Bulb; Fog Light Bulbs; Car Bulbs; Bulb; Bulb Fog Lamp 50 Watt
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.5 x 2.0 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L0009040
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler 300M Submodels:
- Base, Pro-Am, Special | 6 Cyl 3.5 L GAS

2000 Chrysler 300M Fog Light Bulb Parts and Q&A

Q: How to Replace a Fog Light Bulb on 2000 Chrysler 300M?
A: To service the fog lamp bulb, remove the housing screw and pull out the lamp. Take off the rear cover, clip the wire off and remove the bulb. Connect the new bulb, being careful not to touch the glass, and reassemble the housing checking for operation and alignment.