How to Remove and Install a Crankshaft Seal on 2000 Dodge Avenger?

Start by making a cut into the oil seal lip at the front with a knife. Next, take a shop towel and cover the end of a flat-tipped screwdriver, fit it into the groove of the oil seal and carefully pull out the oil seal to prevent damaging the crankshaft and the oil pump case. Apply a little engine oil on the oil seal lip before putting it into the cylinder block and tap it into place.

OEM 2000 Dodge Avenger Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Seal found

View related parts
2000 Dodge Avenger Rear Main Seal Part Number: MD372251
Product Specifications
- Other Name: Seal - Crankshaft Oil; Seal Crankshaft Oil Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.5 x 4.4 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MD372251
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Avenger Submodels:
- Base, ES | 6 Cyl 2.5 L GAS

2000 Dodge Avenger Crankshaft Seal Parts and Q&A

Q: How to Remove and Install a Crankshaft Seal on 2000 Dodge Avenger?
A: Start by making a cut into the oil seal lip at the front with a knife. Next, take a shop towel and cover the end of a flat-tipped screwdriver, fit it into the groove of the oil seal and carefully pull out the oil seal to prevent damaging the crankshaft and the oil pump case. Apply a little engine oil on the oil seal lip before putting it into the cylinder block and tap it into place.