How to Service an Exhaust Pipe and Install a Heated Oxygen Sensor on 2000 Dodge Avenger?

Remove the heated oxygen sensor before tending to the exhaust pipe and afterward, clean the threads on the exhaust manifold with an 18-mm x 1.5 + 6E tap. During installation, for sensors already used, rub in Loctite 771-64 or a similar antiseize compound on the threads, but pre-coated sensors do not need any additional treatment.

OEM 2000 Dodge Avenger Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Exhaust Pipe found

View related parts
2000 Dodge Avenger Front Pipe Part Number: MR340966
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Pipe Exhaust
- Item Weight: 16.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR340966
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Avenger Submodels:
- Base, ES | 6 Cyl 2.5 L GAS

2000 Dodge Avenger Exhaust Pipe Parts and Q&A

Q: How to Service an Exhaust Pipe and Install a Heated Oxygen Sensor on 2000 Dodge Avenger?
A: Remove the heated oxygen sensor before tending to the exhaust pipe and afterward, clean the threads on the exhaust manifold with an 18-mm x 1.5 + 6E tap. During installation, for sensors already used, rub in Loctite 771-64 or a similar antiseize compound on the threads, but pre-coated sensors do not need any additional treatment.