How to Service and Repair a Rod Bearing on 2001 Chrysler Voyager?

To service the connecting rod bearing, measure the clearance with Plastigage and use new bolts, oiled with clean engine oil. Install bolts finger tight, then alternately torque to 27 Nm plus 1/4 turn. Finally, check the connecting rod side clearance with a feeler gauge.

OEM 2001 Chrysler Voyager Rod Bearing

Engine Connecting Rod Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rod Bearings found

View related parts
2001 Chrysler Voyager Bearings Part Number: 5174612AA
$14.57 MSRP: $24.10
You Save: $9.53 (40%)
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Bearing Kit Connecting Rod Standard See Note; Bearing Kit Connecting Rod Standard
- Replaces: 5093448AB, 5012588AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5174612AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Voyager Submodels:
- Base, Ec, LX | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2001 Chrysler Voyager Bearings Part Number: 5161294AA
$18.30 MSRP: $27.05
You Save: $8.75 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Kit - Connecting Rod; Bearing Package Connecting Rod Standard: One [1] Upper & One [1] Lower Bearing.
- Replaces: 5012056AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 3.8 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5161294AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Voyager Submodels:
- Base, LX, SE | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

2001 Chrysler Voyager Rod Bearing Parts and Q&A

Q: How to Service and Repair a Rod Bearing on 2001 Chrysler Voyager?
A: To service the connecting rod bearing, measure the clearance with Plastigage and use new bolts, oiled with clean engine oil. Install bolts finger tight, then alternately torque to 27 Nm plus 1/4 turn. Finally, check the connecting rod side clearance with a feeler gauge.