How to Replace the Power Steering Reservoir on a 2.7 Liter Engine on 2001 Dodge Intrepid?

In order to replace power steering reservoir on a 2.7-liter engine, unscrew three bolts, remove power steering pump, then remove the reservoir. Apply lubricant on the O-ring of the new reservoir, fit it in the pump and tighten the bolts to requirement. Install the power steering pump again.

OEM 2001 Dodge Intrepid Power Steering Reservoir

Power Steering Fluid Reservoir Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Steering Reservoirs found

View related parts
2001 Dodge Intrepid Reservoir Part Number: 5011239AA
Product Specifications
- Other Name: Reservoir - Power Steering Pump; Power Steering Reservoir; Reservoir Power Steering Pump With Cap; Reservoir Power Steering Pump
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.8 x 6.8 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5011239AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Intrepid Submodels:
- Base, ES, SE | 6 Cyl 2.7 L GAS
View related parts
2001 Dodge Intrepid Reservoir Part Number: 4772456AD
Product Specifications
- Other Name: Reservoir - Power Steering Pump; Power Steering Reservoir; Reservoir Power Steering Pump With Cap; Reservoir Power Steering Pump
- Item Weight: 1.00 Pounds
- Item Dimensions: 10.3 x 6.0 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4772456AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

2001 Dodge Intrepid Power Steering Reservoir Parts and Q&A

Q: How to Replace the Power Steering Reservoir on a 2.7 Liter Engine on 2001 Dodge Intrepid?
A: In order to replace power steering reservoir on a 2.7-liter engine, unscrew three bolts, remove power steering pump, then remove the reservoir. Apply lubricant on the O-ring of the new reservoir, fit it in the pump and tighten the bolts to requirement. Install the power steering pump again.