How to Service a Steering Knuckle on 2001 Dodge Intrepid?

To service the steering knuckle, lift up the vehicle, take off the front wheel, and unattached the caliper and the rotor. Unscrew the wheel speed sensor and then remove the hub and bearing assembly. Install the steering knuckle, hub, and bearing back in place with the correct torque specification and it is then appropriate to lower the vehicle.

OEM 2001 Dodge Intrepid Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2001 Dodge Intrepid Knuckle, Front Passenger Side Part Number: 4782124AC
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Replaces: 4782124, 4782124AB
- Item Weight: 10.20 Pounds
- Item Dimensions: 13.8 x 11.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782124AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2001 Dodge Intrepid Knuckle, Front Driver Side Part Number: 4782125AC
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Replaces: 4782125, 4782125AB
- Item Weight: 10.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782125AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

2001 Dodge Intrepid Steering Knuckle Parts and Q&A

Q: How to Service a Steering Knuckle on 2001 Dodge Intrepid?
A: To service the steering knuckle, lift up the vehicle, take off the front wheel, and unattached the caliper and the rotor. Unscrew the wheel speed sensor and then remove the hub and bearing assembly. Install the steering knuckle, hub, and bearing back in place with the correct torque specification and it is then appropriate to lower the vehicle.