How to Service and Repair a Radiator Support on 2001 Dodge Ram 1500?

To reach the upper radiator crossmember, take the hood latch off, then radiator and condenser bolts, and lastly crossmember bolts. Install the crossmember using bolts tightened to 28 N.m, re-install the radiator and the condenser bolts at 8 N.m, and re-install the hood latch.

OEM 2001 Dodge Ram 1500 Radiator Support

Center Radiator Support

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Radiator Supports found

View related parts
2001 Dodge Ram 1500 Upper Tie Bar Part Number: 55275412AD
Product Specifications
- Other Name: Plate - Radiator; Closure Radiator
- Replaces: 55275412AB
- Item Weight: 8.20 Pounds
- Item Dimensions: 51.1 x 4.4 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55275412AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 1500 Submodels:
- Base, LT, Laramie, SLT, SS/T 5.9L, ST, Sport, WS | 3.9L V6, 5.2L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 1500 Lower Tie Bar Part Number: 55275413
Product Specifications
- Other Name: Housing - Radiator; Closure Radiator
- Item Weight: 15.40 Pounds
- Item Dimensions: 57.2 x 22.1 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55275413
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 1500 Submodels:
- Base, LT, Laramie, SLT, SS/T 5.9L, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2001 Dodge Ram 1500 Radiator Support Parts and Q&A

Q: How to Service and Repair a Radiator Support on 2001 Dodge Ram 1500?
A: To reach the upper radiator crossmember, take the hood latch off, then radiator and condenser bolts, and lastly crossmember bolts. Install the crossmember using bolts tightened to 28 N.m, re-install the radiator and the condenser bolts at 8 N.m, and re-install the hood latch.