How to Replace a Fog Light Bulb on 2001 Jeep Cherokee?

To service the fog lamp bulb, remove the access cover screws and the spring clip. Disconnect and take the bulb off. For installation, do not touch the glass of the bulb. Set the bulb in place, reconnect, secure in the spring clip and install the access cover screws again.

OEM 2001 Jeep Cherokee Fog Light Bulb

Fog Lamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fog Light Bulbs found

View related parts
2001 Jeep Cherokee Exterior Bulbs Part Number: L00H355W
$14.57 MSRP: $20.75
You Save: $6.18 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb - Fog Lamp; Fog Light Bulbs; Car Bulbs; Fog Lamp Bulb; Bulb; Bulb Fog Lamp H-3 55 Watt
- Replaces: MS820964, L01255H3
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.5 x 2.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L00H355W
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Cherokee Submodels:
- Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2001 Jeep Cherokee Fog Lamp Bulb Part Number: 4864773
Product Specifications
- Other Name: Retainer - Fog Lamp Bulb; Fog Light Bulbs; Car Bulbs; Fog Lamp Assembly Retainer; Retainer Fog Lamp Bulb
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.8 x 7.0 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4864773
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Cherokee Submodels:
- Classic, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2001 Jeep Cherokee Fog Light Bulb Parts and Q&A

Q: How to Replace a Fog Light Bulb on 2001 Jeep Cherokee?
A: To service the fog lamp bulb, remove the access cover screws and the spring clip. Disconnect and take the bulb off. For installation, do not touch the glass of the bulb. Set the bulb in place, reconnect, secure in the spring clip and install the access cover screws again.