How to Service the Flywheel on 2002 Chrysler Sebring?

First detach the transaxle from the transmission, then get rid of the flex plate bolts and the plate itself. Install the drive plate onto the crankshaft and then use Mopar Lock & Seal Adhesive to treat the flex plate bolt threads. Set the included flex plate bolts in place and tighten them to 95 Nm (70 ft. lbs.), followed by placing the transaxle in position again.

OEM 2002 Chrysler Sebring Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Flywheel found

View related parts
2002 Chrysler Sebring Flywheel Part Number: MD379541
Product Specifications
- Other Name: Flywheel - Engine; Flywheel Engine
- Item Weight: 9.30 Pounds
- Item Dimensions: 12.2 x 12.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MD379541
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Sebring Submodels:
- LX, LXi, Limited | 6 Cyl 3.0 L GAS

2002 Chrysler Sebring Flywheel Parts and Q&A

Q: How to Service the Flywheel on 2002 Chrysler Sebring?
A: First detach the transaxle from the transmission, then get rid of the flex plate bolts and the plate itself. Install the drive plate onto the crankshaft and then use Mopar Lock & Seal Adhesive to treat the flex plate bolt threads. Set the included flex plate bolts in place and tighten them to 95 Nm (70 ft. lbs.), followed by placing the transaxle in position again.