How to Service a Brake Fluid Level Sensor on 2003 Chrysler Town & Country?

Start by taking out the wiring harness connector from the brake fluid reservoir level switch. Press your fingers into the various retaining tabs located on the other end of the brake fluid level switch. Squeezing the retaining tabs, pull the connector end of the brake fluid level switch out of the master cylinder brake fluid reservoir. Push the brake fluid level switch into the brake fluid reservoir on the left side, up until the retainers begin to lock it. Connect the vehicle wiring harness connector to the brake fluid level switch as well.

OEM 2003 Chrysler Town & Country Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2003 Chrysler Town & Country Level Indicator Part Number: 5140310AA
$22.68 MSRP: $28.90
You Save: $6.22 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Brake Fluid Level; Fluid Level Switch; Switch; Switch Brake Fluid Level
- Replaces: 4797655
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.9 x 1.2 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5140310AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, SX, Touring | 3.3L V6, 3.5L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2003 Chrysler Town & Country Brake Fluid Level Sensor Parts and Q&A

Q: How to Service a Brake Fluid Level Sensor on 2003 Chrysler Town & Country?
A: Start by taking out the wiring harness connector from the brake fluid reservoir level switch. Press your fingers into the various retaining tabs located on the other end of the brake fluid level switch. Squeezing the retaining tabs, pull the connector end of the brake fluid level switch out of the master cylinder brake fluid reservoir. Push the brake fluid level switch into the brake fluid reservoir on the left side, up until the retainers begin to lock it. Connect the vehicle wiring harness connector to the brake fluid level switch as well.