How to service and repair the radiator Fan Blade on 2003 Dodge Ram 3500 Van?

To service the fan in the radiator, disconnect the battery negative cable, remove the air cleaner intake tube and fan shroud and the fan assembly using a Snap-On 36MM Fan Wrench. Clean the fan blades and check for damage, and change if needed. Reconnect and reconnect the cable from the battery.

OEM 2003 Dodge Ram 3500 Van Fan Blade

Fan Propeller Blade

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fan Blades found

View related parts
2003 Dodge Ram 3500 Van Fan Blade Part Number: 52027999AC
$549.67 MSRP: $719.00
You Save: $169.33 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan - Cooling; Engine Cooling Fan Clutch Blade; Radiator Fan Assembly; Fan
- Replaces: 52027999AB
- Item Weight: 1.40 Pounds
- Item Dimensions: 20.0 x 20.2 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52027999AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 3500 Van Submodels:
- Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
View related parts
2003 Dodge Ram 3500 Van Fan Blade Part Number: 52028440AB
Product Specifications
- Other Name: Fan - Cooling; Engine Cooling Fan Clutch Blade; Radiator Fan Assembly
- Item Weight: 6.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52028440AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Ram 3500 Van Submodels:
- Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS

2003 Dodge Ram 3500 Van Fan Blade Parts and Q&A

Q: How to service and repair the radiator Fan Blade on 2003 Dodge Ram 3500 Van?
A: To service the fan in the radiator, disconnect the battery negative cable, remove the air cleaner intake tube and fan shroud and the fan assembly using a Snap-On 36MM Fan Wrench. Clean the fan blades and check for damage, and change if needed. Reconnect and reconnect the cable from the battery.