Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2003 Dodge Stratus Submodels:
Base, ES, SE, SE Plus, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
2003 Dodge Stratus Axle Shaft Parts and Q&A
Q: How to Remove and Install an Axle Shaft on 2003 Dodge Stratus?
A: To take out the axle shaft, lift up the vehicle, take off the front tire and disconnect the caliper assembly. Installation of the brake rotor, tie rod nut and lower ball joint nut should be removed. Isolate the halfshaft and the steering knuckle then excavate the inner tripod joint. Install new joint, reassemble, and tighten all nuts to recommended torque.