Other Name: Switch - Power Seat; Power Seat Switch, Front Right; Power Seat Switch; Adjuster Switch
Position: Front Passenger Side
Replaces: YD08XDVAB, YD08XDVAC
Item Weight: 0.60 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: YD08XDVAD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2004 Chrysler Pacifica Submodels:
Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
2004 Chrysler Pacifica Seat Switch Parts and Q&A
Q: How to Maintain the Seat Switch for Passengers on 2004 Chrysler Pacifica?
A: Before dealing with the passenger seat switch, disconnect the negative battery terminal. Remove the front door trim panel according to the proper instructions. After that, pull the wire harness connector straight away from the door module by pushing down the retaining tab first. Press down on the four clips that hold the seat switch to the door trim and unplug the power seat switch from the panel. For installation, fix the seat switch onto the door trim panel and lock it in position by pressing down while all four clips are attached. Connect the wire harness connector to the door module, then put the front door trim panel in place using the correct method. At last, attach the negative battery cable to the negative terminal.