Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
2004 Chrysler Sebring Car Speakers Parts and Q&A
Q: How to Remove and Install Car Speakers Like the JR41 on 2004 Chrysler Sebring?
A: Before removing JR41, push down the negative terminal on the battery and put the seat backs into the folded position. After that, take out the C-pillar trim and the lower quarter trim located behind the seats. First, remove the screws from the rear shelf trim and then take it out to reach the speaker. Unscrew the speaker screws and disconnect the wire connector belonging to the speaker, before you remove it. To install, link the wire harness connector to your speaker and securely fit the speaker into the opening it will serve. Screw the speakers in place with 4 Nm (35 in.lbs.) of torque and put the rear shelf trim, lower quarter trim and C-pillar trim back in their places. Then, lift the seat backs and link the battery negative cable back to the socket.