How to Service Seat Heaters Without Damaging the OEM Heating Element on 2004 Dodge Caravan?

To service heated seat elements, don't remove the OEM heating element. Instead, put the replacement element right on the cushion. Disconnect the negative battery terminal, remove the trim cover and cut the old element wire. Stick the new element on the foam, reconnect and check operation before re-assembling.

OEM 2004 Dodge Caravan Seat Heater

Seat Warmer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heaters found

View related parts
2004 Dodge Caravan Seat Back Heater Part Number: 68001672AA
$22.79 MSRP: $131.00
You Save: $108.21 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit; Seat Heater
- Replaces: 5080877AA
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68001672AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Caravan Submodels:
- Base, C/V, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2004 Dodge Caravan Seat Cushion Heater Part Number: 68001481AA
Product Specifications
- Other Name: Kit; Seat Heater
- Replaces: 5080875AA, 5080876AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 16.6 x 10.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68001481AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Caravan Submodels:
- Base, C/V, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

2004 Dodge Caravan Seat Heater Parts and Q&A

Q: How to Service Seat Heaters Without Damaging the OEM Heating Element on 2004 Dodge Caravan?
A: To service heated seat elements, don't remove the OEM heating element. Instead, put the replacement element right on the cushion. Disconnect the negative battery terminal, remove the trim cover and cut the old element wire. Stick the new element on the foam, reconnect and check operation before re-assembling.