How to Service an Oil Cooler on 2004 Dodge Grand Caravan?

You should start by emptying the coolant from the vehicle to service the oil cooler. Unhook the oil cooler inlet and outlet hoses, change the oil filter and remove the fitting that holds the oil cooler after that. During installation, grease the seal and fit the oil cooler onto the oil filter adapter fitting, with the oil cooler flat side parallel to the oil pan rail. Following that, put in the oil cooler attachment fitting and tighten it to 27 Nm (20 ft. lbs.), after which you should install the oil filter. After that, connect the oil cooler hoses and fill the cooling system.

OEM 2004 Dodge Grand Caravan Oil Cooler

Engine Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Cooler found

View related parts
2004 Dodge Grand Caravan Transmission Cooler Part Number: 4809271AD
Product Specifications
- Other Name: Cooler - Oil; Automatic Transmission Oil Cooler; Automatic Transmission Oil Cooler Assembly; Cooler Oil
- Item Weight: 2.80 Pounds
- Item Dimensions: 41.8 x 15.3 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4809271AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Grand Caravan Submodels:
- Anniversary Edition, C/V, EX, SE, SXT | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2004 Dodge Grand Caravan Oil Cooler Parts and Q&A

Q: How to Service an Oil Cooler on 2004 Dodge Grand Caravan?
A: You should start by emptying the coolant from the vehicle to service the oil cooler. Unhook the oil cooler inlet and outlet hoses, change the oil filter and remove the fitting that holds the oil cooler after that. During installation, grease the seal and fit the oil cooler onto the oil filter adapter fitting, with the oil cooler flat side parallel to the oil pan rail. Following that, put in the oil cooler attachment fitting and tighten it to 27 Nm (20 ft. lbs.), after which you should install the oil filter. After that, connect the oil cooler hoses and fill the cooling system.