How to Service the Intake Manifold Temperature Sensor on 2004 Dodge Sprinter 2500?

Always begin the service of the Intake Manifold Temperature (IMT) Sensor by removing the negative battery cable. After that, take out the wiring harness connector at the intake manifold temperature sensor before pressing in the sensor's arms to unhook it from the charge air pipe. When installing, place the intake manifold temperature sensor over the charge air pipe access hole, press the locking tabs, fit the sensor into place and drop the tabs down. Reattach the negative battery cable as your last step.

OEM 2004 Dodge Sprinter 2500 Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Intake Manifold Temperature Sensor found

View related parts
2004 Dodge Sprinter 2500 Air Intake Temperature Sensor Part Number: 5149209AA
$49.69 MSRP: $109.00
You Save: $59.31 (55%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Charge Air Temperature; Turbocharger Boost; Intake Air Temperature.; Sending Unit; Sensor Charge Air Temperature
- Replaces: 4862635AA, 5080343AA, 5174042AC, 5174042AB, 5174042AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 2.1 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149209AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Sprinter 2500 Submodels:
- Base | 2.7L L5, 3.0L V6, 5 Cyl 2.7 L DIESEL, 6 Cyl 3.0 L DIESEL

2004 Dodge Sprinter 2500 Intake Manifold Temperature Sensor Parts and Q&A

Q: How to Service the Intake Manifold Temperature Sensor on 2004 Dodge Sprinter 2500?
A: Always begin the service of the Intake Manifold Temperature (IMT) Sensor by removing the negative battery cable. After that, take out the wiring harness connector at the intake manifold temperature sensor before pressing in the sensor's arms to unhook it from the charge air pipe. When installing, place the intake manifold temperature sensor over the charge air pipe access hole, press the locking tabs, fit the sensor into place and drop the tabs down. Reattach the negative battery cable as your last step.