How to Service and Repair a Shift Knob for an A/T Shifter on 2005 Chrysler Pacifica?

To replace the A/T shifter gear shift knob, an initial step is to loosen the set-screw without removing it after which, the knob should be removed. To reinstall place the knob once again on the mechanism and screw the set-screw up to 2 Nm (20 inch lbs.).

OEM 2005 Chrysler Pacifica Shift Knob

Gear Shift Knobs

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Shift Knobs found

View related parts
2005 Chrysler Pacifica Shift Knob Part Number: 5310006AB
Product Specifications
- Other Name: Knob - Gearshift; Automatic Transmission Shift Lever Knob; Automatic Transmission Selector Handle; Knob Gearshift
- Replaces: 5310006AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.2 x 4.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5310006AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 3.5L V6, 3.8L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Chrysler Pacifica Shift Knob Part Number: 4683983AB
Product Specifications
- Other Name: Knob - Gearshift; Automatic Transmission Shift Lever Knob; Automatic Transmission Selector Handle; Knob Gearshift
- Replaces: 4779398AC, 4779398AB
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4683983AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2005 Chrysler Pacifica Shift Knob Parts and Q&A

Q: How to Service and Repair a Shift Knob for an A/T Shifter on 2005 Chrysler Pacifica?
A: To replace the A/T shifter gear shift knob, an initial step is to loosen the set-screw without removing it after which, the knob should be removed. To reinstall place the knob once again on the mechanism and screw the set-screw up to 2 Nm (20 inch lbs.).