How to service the Secondary Air Injection Check Valve on 2005 Chrysler Sebring?

To service the Air Injection Check Valve, remove the valve and the connector hose. Disconnect the quick connector and then unscrew and remove the check valve from the exhaust manifold. Clean the sealing surface and install the new One Way Check Valve with a gasket, torque the screws to 12 Nm and connect the tube again.

OEM 2005 Chrysler Sebring Secondary Air Injection Check Valve

SAI Check Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Secondary Air Injection Check Valve found

View related parts
2005 Chrysler Sebring Check Valve Part Number: MR386483
Product Specifications
- Other Name: Valve - Fuel Vapor Control Check; Vacuum Check Valve; Diverter Valve; Valve Fuel Vapor Control Check
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR386483
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Chrysler Sebring Submodels:
- Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

2005 Chrysler Sebring Secondary Air Injection Check Valve Parts and Q&A

Q: How to service the Secondary Air Injection Check Valve on 2005 Chrysler Sebring?
A: To service the Air Injection Check Valve, remove the valve and the connector hose. Disconnect the quick connector and then unscrew and remove the check valve from the exhaust manifold. Clean the sealing surface and install the new One Way Check Valve with a gasket, torque the screws to 12 Nm and connect the tube again.