OEM 2005 Dodge Neon Grille

2005 Dodge Neon Grille Parts and Q&A

• Q: How to Remove and Install a Grille on 2005 Dodge Neon?

  A: Release the latch for the hood, lift the hood and support it with the prop rod to remove the grille. Afterwards, remove the cover beneath and then unscrew the nut to release the emblem. Use the tool C-4755 or an equivalent trim stick and remove the clips to take out the grille and grille surrounds. In order to import, unfold the hood latch, open the hood and take out the screws holding the grille to the front fascia. Detach the grille from the fascia by compressing the lower grille clips, unclip it with pliers and fully pull the grille away from the car. Reattach the grille and grille surrounds in place, seeing that every retaining clip fits completely. Once the emblem and nut are installed, put on the fascia. For easy import installation, ensure the grille slots capture the tab, with the clips locking and the whole assembly slot into the lower fascia when brought forward. After that, seat the top of the grille against the fascia and add the screws that hold the grille in place.