How to Service a Belt Tensioner on a 5.9L Diesel on 2005 Dodge Ram 2500?

Before you service the Drive Belt Tensioner on a 5.9L Diesel, take out the accessory drive belt. After that, remove the bolt from the tensioner mount and then take out the tensioner (7). Place the tensioner assembly on the water inlet bracket so the dowel on its back is in the hole. Screw the bolt to achieve 43 Nm of torque and replace the drive belt afterward. The pressure in springs is so high that disassembling the automatic tensioner is not safe and should not be done.

OEM 2005 Dodge Ram 2500 Belt Tensioner

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Belt Tensioners found

View related parts
2005 Dodge Ram 2500 Serpentine Tensioner Part Number: 53032130AC
$67.18 MSRP: $101.00
You Save: $33.82 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tensioner - Belt; Accessory Drive Belt Tensioner Assembly; Serpentine Belt Drive Kit; Tensioner; Tensioner Belt; Belt Tensioner
- Replaces: 53032130AA
- Item Weight: 2.10 Pounds
- Item Dimensions: 3.2 x 3.8 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032130AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2005 Dodge Ram 2500 Pulley - Belt Part Number: 5086958AB
$639.80 MSRP: $965.00
You Save: $325.20 (34%)
ADD TO CART
Product Specifications
- Other Name: PULLEY-BELT
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086958AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6

2005 Dodge Ram 2500 Belt Tensioner Parts and Q&A

Q: How to Service a Belt Tensioner on a 5.9L Diesel on 2005 Dodge Ram 2500?
A: Before you service the Drive Belt Tensioner on a 5.9L Diesel, take out the accessory drive belt. After that, remove the bolt from the tensioner mount and then take out the tensioner (7). Place the tensioner assembly on the water inlet bracket so the dowel on its back is in the hole. Screw the bolt to achieve 43 Nm of torque and replace the drive belt afterward. The pressure in springs is so high that disassembling the automatic tensioner is not safe and should not be done.