How to Remove and Install a Rear Door Window Regulator on 2006 Chrysler Sebring?

Start by popping out the water dam to take out the door window regulator. Remove the glass from the roller channel and insert the glass up inside the door frame. If you have one, detach the power window motor wire harness. Open the screw that connects the scissor channel to the bottom of the door and remove the heads of both screws and bolts from the keyhole slots. Release the bolts holding the regulator to the door panel and remove the regulator from its place. Nudge the regulator toward the back of the door and spin the forward part of the roller channel through the opening in the door panel. For installation, put the regulator through the access hole in the door panel and tighten the bolts holding it in place. Attach the two screw heads provided to the regulator scissor channel into the keyhole holes in the door panel. If the power windows are working, reconnect the necessary motor wire, slide the glass back into the regulator roller channel and fasten the door glass to the channel. Then, set up the door waterdam once more.

OEM 2006 Chrysler Sebring Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Window Regulators found

View related parts
2006 Chrysler Sebring Regulator, Rear Passenger Side Part Number: 5066040AB
$381.35 MSRP: $503.00
You Save: $121.65 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Quarter Window; Window Regulator, Rear Right; Regulator Quarter Window; Window Regulator
- Position: Rear Passenger Side
- Item Weight: 12.30 Pounds
- Item Dimensions: 6.1 x 17.1 x 28.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5066040AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2006 Chrysler Sebring Window Regulator, Front Driver Side Part Number: 4878109AL
$113.79 MSRP: $236.00
You Save: $122.21 (52%)
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Left; Regulator; Regulator Front Door Window With Motor
- Position: Front Driver Side
- Replaces: 4878109AG, 4878109AK, 4878109AJ, 4878109AF, 4878109AH, 4878109AI
- Item Weight: 7.20 Pounds
- Item Dimensions: 33.5 x 12.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4878109AL
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Chrysler Sebring Window Regulator, Rear Driver Side Part Number: 5016519AB
$75.10 MSRP: $135.00
You Save: $59.90 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Left; Regulator; Regulator Rear Door Window
- Position: Rear Driver Side
- Item Weight: 3.00 Pounds
- Item Dimensions: 25.5 x 14.9 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5016519AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Chrysler Sebring Window Regulator, Rear Passenger Side Part Number: 5016518AB
$94.35 MSRP: $168.00
You Save: $73.65 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Right; Regulator; Regulator Rear Door Window
- Position: Rear Passenger Side
- Item Weight: 3.00 Pounds
- Item Dimensions: 26.5 x 15.4 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5016518AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Chrysler Sebring Window Regulator, Front Passenger Side Part Number: 4878108AL
$192.50 MSRP: $343.00
You Save: $150.50 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Right; Regulator; Regulator Front Door Window With Motor
- Position: Front Passenger Side
- Replaces: 4878108AG, 4878108AK, 4878108AF, 4878108AJ, 4878108AH, 4878108AI
- Item Weight: 6.50 Pounds
- Item Dimensions: 5.0 x 10.6 x 28.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4878108AL
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Chrysler Sebring Regulator, Front Passenger Side Part Number: 4724282AH
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Right; Regulator Front Door Window With Motor And Spring; Window Regulator
- Position: Front Passenger Side
- Replaces: 4724282AG, 4724282AF, 4724282AD, 4724282AE, 5003260AA, 5011012AA
- Item Weight: 6.20 Pounds
- Item Dimensions: 25.8 x 13.7 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4724282AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2006 Chrysler Sebring Regulator, Rear Driver Side Part Number: 5066041AB
Product Specifications
- Other Name: Regulator - Quarter Window; Window Regulator, Rear Left; Regulator Quarter Window; Window Regulator
- Position: Rear Driver Side
- Item Weight: 13.70 Pounds
- Item Dimensions: 4.3 x 15.9 x 25.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5066041AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2006 Chrysler Sebring Regulator, Front Driver Side Part Number: 4724283AH
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Left; Regulator Front Door Window With Motor And Spring; Window Regulator
- Position: Front Driver Side
- Replaces: 4724283AF, 4724283AE, 4724283AG, 4724283AD
- Item Weight: 7.70 Pounds
- Item Dimensions: 27.0 x 14.4 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4724283AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2006 Chrysler Sebring Window Regulator Parts and Q&A

Q: How to Remove and Install a Rear Door Window Regulator on 2006 Chrysler Sebring?
A: Start by popping out the water dam to take out the door window regulator. Remove the glass from the roller channel and insert the glass up inside the door frame. If you have one, detach the power window motor wire harness. Open the screw that connects the scissor channel to the bottom of the door and remove the heads of both screws and bolts from the keyhole slots. Release the bolts holding the regulator to the door panel and remove the regulator from its place. Nudge the regulator toward the back of the door and spin the forward part of the roller channel through the opening in the door panel. For installation, put the regulator through the access hole in the door panel and tighten the bolts holding it in place. Attach the two screw heads provided to the regulator scissor channel into the keyhole holes in the door panel. If the power windows are working, reconnect the necessary motor wire, slide the glass back into the regulator roller channel and fasten the door glass to the channel. Then, set up the door waterdam once more.