How to Maintain the Front Wiper Arm on 2006 Dodge Charger?

To service the front wiper arm, remove nut caps 3 and retaining nuts 4. Use a two-jaw puller to detach wiper arm 7, then remove wiper arms 1 and 2. For installation, secure wiper arms 1 with nuts 4 at 18 N.m (13 ft. lbs.) and replace nut caps 3.

OEM 2006 Dodge Charger Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Arms found

View related parts
2006 Dodge Charger Wiper Arm, Front Driver Side Part Number: 5139094AB
Product Specifications
- Other Name: Arm - Front Wiper; Windshield Wiper Arm, Left; Front Arm
- Position: Front Driver Side
- Replaces: 5139094AA
- Item Weight: 1.30 Pounds
- Item Dimensions: 2.2 x 4.2 x 22.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139094AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Dodge Charger Wiper Arm, Front Passenger Side Part Number: 5139093AB
Product Specifications
- Other Name: Arm - Front Wiper; Windshield Wiper Arm, Right; Front Arm
- Position: Front Passenger Side
- Replaces: 5139093AA
- Item Weight: 1.20 Pounds
- Item Dimensions: 2.3 x 3.1 x 21.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139093AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2006 Dodge Charger Wiper Arm Parts and Q&A

Q: How to Maintain the Front Wiper Arm on 2006 Dodge Charger?
A: To service the front wiper arm, remove nut caps 3 and retaining nuts 4. Use a two-jaw puller to detach wiper arm 7, then remove wiper arms 1 and 2. For installation, secure wiper arms 1 with nuts 4 at 18 N.m (13 ft. lbs.) and replace nut caps 3.