Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Rear; Front Oxygen Sensor; Sensor Oxygen
Position: Rear
Item Weight: 0.70 Pounds
Item Dimensions: 1.1 x 1.8 x 19.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 56029085AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Dodge Grand Caravan Submodels:
Base, C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
2006 Dodge Grand Caravan Oxygen Sensor Parts and Q&A
Q: How to Maintain an Oxygen Sensor Upstream on 2006 Dodge Grand Caravan?
A: Before speaking to the sensor, first remove the battery and battery tray. Separate the speed control vacuum harness and the electrical connection from the servo and remove the servo and its bracket. An Snap-On YA8875 sock is ideal for getting the oxygen sensor out of the engine. Clean the threads on the lens with a 18 mm X 1.5 + 6E tap and for reusing the sensor, apply Loctite 771-64 anti-seize compound to the threads. To install, run the tap over the exhaust manifold threads, but only use anti-seize if the original sensor has both and then tighten the sensor to a maximum of 27 N.m (20 ft. lbs.). Attach the O2 sensor electrical connector to its port and insert the sensor back into the bracket and after that attach the electrical connector for the speed control servo. Put back the speed control servo and bracket, attach the speed control vacuum harness and then fit the battery tray and battery once more.