Other Name: Pad - Front Seat Cushion; Seat Cushion Pad, Front Right; Seat Cushion Pad, Front Left; Seat Heater Pad, Front Lower; Seat Cushion Pad; Front Seat Cushion Heating Element; Heated Pad for front seat.
Position: Front Lower
Item Weight: 0.70 Pounds
Item Dimensions: 11.7 x 11.3 x 2.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4610096AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
2006 Dodge Ram 2500 Seat Heater Parts and Q&A
Q: How to Maintain Your Seat Heater on 2006 Dodge Ram 2500?
A: First, unmount the negative battery terminal to work on the seat heater. Pull out the correct seat cushion or seat back trim cover, then unplug the electricity from the stopped working heated seat. Carefully remove the loose wire ends from the inoperative heating element at the edge of the original heating element. Remove the sticky backing from your replacement heating element and attach it directly on the existing factory element. Remain careful throughout the process not to fold or crease the element assembly, because this can result in it failing sooner. After that, attach the new heating element's electrical connections, plug in the battery negative cable again and check that the heated seat system is working. Next, put in the right seat cushion or seat back trim cover and make sure all the seat wiring is routed onto the harness and hidden between the rear of the foam cushion and the rear flap of the trim fabric.