How to Remove and Install the Throttle Cable on a 5.7L V-8 Engine on 2006 Dodge Ram 3500?

The 5.7L V-8 engine has a Throttle Control Cable that connects to the APPS but does not have a separate cable to the throttle body. To remove it, disconnect the cable from the pedal arm and APPS and pull the housing into the engine compartment. For installation you have to do the opposite and check for binding before starting the engine.

OEM 2006 Dodge Ram 3500 Throttle Cable

Accelerator Throttle Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Throttle Cables found

View related parts
2006 Dodge Ram 3500 Throttle Cable Part Number: 53032162AD
Product Specifications
- Other Name: Cable - Accelerator; Cable Accelerator
- Replaces: 53032162AC
- Item Weight: 1.90 Pounds
- Item Dimensions: 44.9 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032162AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, Sport | 10 Cyl 8.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 3500 Throttle Cable Part Number: 52110386AC
Product Specifications
- Other Name: Cable - Accelerator; Cable Accelerator
- Item Weight: 0.60 Pounds
- Item Dimensions: 12.4 x 12.4 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52110386AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, Sport | 8 Cyl 5.7 L GAS

2006 Dodge Ram 3500 Throttle Cable Parts and Q&A

Q: How to Remove and Install the Throttle Cable on a 5.7L V-8 Engine on 2006 Dodge Ram 3500?
A: The 5.7L V-8 engine has a Throttle Control Cable that connects to the APPS but does not have a separate cable to the throttle body. To remove it, disconnect the cable from the pedal arm and APPS and pull the housing into the engine compartment. For installation you have to do the opposite and check for binding before starting the engine.