How to Service and Repair a Cigarette Lighter on 2006 Dodge Sprinter 2500?

In order to fix the cigarette lighter, unplug the negative cable of the battery. Take out the light knob and check the bottom of the receptacle. Insert snap ring pliers to unscrew the retaining bosses, and very carefully withdraw the base. Lastly, unscrew the wire harness to the receptacle and take off the mount in the panel.

OEM 2006 Dodge Sprinter 2500 Cigarette Lighter

Car Cigarette Lighter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Cigarette Lighters found

View related parts
2006 Dodge Sprinter 2500 Power Outlet Part Number: 5133419AA
$21.17 MSRP: $27.50
You Save: $6.33 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Connector; 12 Volt Accessory Power Outlet
- Replaces: 5124458AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.9 x 2.2 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5133419AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Sprinter 2500 Submodels:
- Base | 2.7L L5, 5 Cyl 2.7 L DIESEL
View related parts
2006 Dodge Sprinter 2500 Lighter Part Number: 5103679AA
Product Specifications
- Other Name: Element - Cigar Lighter; Cigarette Lighter Element; Element Cigar Lighter
- Item Weight: 1.00 Pounds
- Item Dimensions: 3.2 x 5.7 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5103679AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Sprinter 2500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

2006 Dodge Sprinter 2500 Cigarette Lighter Parts and Q&A

Q: How to Service and Repair a Cigarette Lighter on 2006 Dodge Sprinter 2500?
A: In order to fix the cigarette lighter, unplug the negative cable of the battery. Take out the light knob and check the bottom of the receptacle. Insert snap ring pliers to unscrew the retaining bosses, and very carefully withdraw the base. Lastly, unscrew the wire harness to the receptacle and take off the mount in the panel.