How to Service and Repair Exterior Emblems on 2006 Dodge Stratus?

To service exterior name plates, mark reference points before removal. Use a heat gun to loosen adhesive, then pry up corners with a trim stick. Clean off adhesive with a remover, then prepare the panel with isopropyl alcohol. Align and press the badging securely, removing any reference marks.

OEM 2006 Dodge Stratus Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Emblems found

View related parts
2006 Dodge Stratus Emblem, Front Part Number: 4805899AB
$86.22 MSRP: $128.00
You Save: $41.78 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ornament - Ram Head; Bumper Cover Emblem, Front; Grille Emblem, Front; Medallion; Medallion Ram Head Front Fascia; Medallion Fascia Ram`S Head; Medallion Ram Head; Medallion Fascia
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.5 x 2.6 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4805899AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Stratus Submodels:
- ES, R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2006 Dodge Stratus Emblem, Rear Part Number: 4806083AB
Product Specifications
- Other Name: Ornament - Decklid; Deck Lid Emblem, Rear; Nameplate; Emblem Decklid Wing
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 19.2 x 6.2 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4806083AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Stratus Submodels:
- ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2006 Dodge Stratus Emblem Parts and Q&A

Q: How to Service and Repair Exterior Emblems on 2006 Dodge Stratus?
A: To service exterior name plates, mark reference points before removal. Use a heat gun to loosen adhesive, then pry up corners with a trim stick. Clean off adhesive with a remover, then prepare the panel with isopropyl alcohol. Align and press the badging securely, removing any reference marks.