How Can the Canister Purge Valve Be Located, Removed, and Installed on 2006 Jeep Grand Cherokee?

The location of duty cycle EVAP canister purge valve is in the engine compartment. To remove it, disconnect electrical connector and vacuum lines then remove it from the bracket. For installation, place the valve back, reconnect the vacuum harness and attach the electrical connector.

OEM 2006 Jeep Grand Cherokee Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2006 Jeep Grand Cherokee Purge Valve Part Number: 52090419AA
Product Specifications
- Other Name: Solenoid - Proportional Purge; Vapor Canister Purge and Vent Valve.; Purge Solenoid; Vacuum Solenoid; Solenoid; Solenoid Proportional Purge
- Item Weight: 1.00 Pounds
- Item Dimensions: 2.6 x 3.5 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52090419AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2006 Jeep Grand Cherokee Canister Purge Valve Parts and Q&A

Q: How Can the Canister Purge Valve Be Located, Removed, and Installed on 2006 Jeep Grand Cherokee?
A: The location of duty cycle EVAP canister purge valve is in the engine compartment. To remove it, disconnect electrical connector and vacuum lines then remove it from the bracket. For installation, place the valve back, reconnect the vacuum harness and attach the electrical connector.