How to Service and Repair an Oil Pressure Switch on 2007 Chrysler 300?

To repair the oil pressure sensor, lift the vehicle on a hoist and take off the lower splash shield. Disconnect the electrical connector from the oil pressure switch, place an oil collection container beneath it, and then unscrew the switch from the engine block to remove it.

OEM 2007 Chrysler 300 Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2007 Chrysler 300 Oil Pressure Sensor Part Number: 5149062AB
$58.92 MSRP: $86.70
You Save: $27.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Switch; Oil Pressure Switch; Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sending Unit
- Replaces: 5149062AA, 68060337AA
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.2 x 6.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149062AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler 300 Submodels:
- Base, C, C Luxury, C Platinum, C SRT8, Limited, S | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Chrysler 300 Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Chrysler 300 Submodels:
- Base, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2007 Chrysler 300 Oil Pressure Switch Parts and Q&A

Q: How to Service and Repair an Oil Pressure Switch on 2007 Chrysler 300?
A: To repair the oil pressure sensor, lift the vehicle on a hoist and take off the lower splash shield. Disconnect the electrical connector from the oil pressure switch, place an oil collection container beneath it, and then unscrew the switch from the engine block to remove it.