Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Chrysler Aspen Power Steering Pump

Power Steering Pump Unit
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Steering Pumps found

  • 2007 Chrysler Aspen Power Steering Pump - 52113239AJ
    2007 Chrysler Aspen Power Steering Pump Diagram - 52113239AJ
    View related parts

    2007 Chrysler Aspen Power Steering Pump Part Number: 52113239AJ

    Product Specifications
    • Other Name: Pump - Power Steering
    • Replaces: 52113239AI, 52113239AF, 52113239AG, 52113239AC, 52113239AH, 52113239AE, 52113239AB
    • Item Weight: 8.40 Pounds
    • Item Dimensions: 12.9 x 12.4 x 5.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52113239AJ
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Chrysler Aspen Submodels:
    • Limited | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
  • 2007 Chrysler Aspen Power Steering Pump - 52013976AD
    2007 Chrysler Aspen Power Steering Pump Diagram - 52013976AD
    View related parts

    2007 Chrysler Aspen Power Steering Pump Part Number: 52013976AD

    Product Specifications
    • Other Name: Pump - Power Steering; Pump Assembly
    • Replaces: 52113240AG, 52113240AC, 52013976AC, 52013976AB, 52113240AE, 52113240AB, 52113240AF, 52113240AH
    • Item Weight: 5.20 Pounds
    • Item Dimensions: 13.5 x 12.2 x 5.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52013976AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Chrysler Aspen Submodels:
    • Limited | 5.7L V8, 8 Cyl 5.7 L GAS

2007 Chrysler Aspen Power Steering Pump Parts and Q&A

  • Q: What Are the Steps and Precautions for Installing a Power Steering Pump Pulley on 2007 Chrysler Aspen?
    A: Be sure not to reinstall the old power steering pump pulley, since it cannot be used again; don't forget to put a new pulley wheel on once you've taken the old one off. You should replace the pulley if it has bends, cracks or is loose. Operate the OTC(R) 7771 or a similar tool to fasten the new pulley to the pump so it's level with the shaft and centered with the pump shaft. Run the engine with the power steering pump installed for about 5 minutes while it's warm and listen for any belt noise. Should you hear a chirp, move the pulley outward about 0.5 mm (0.020 in.) and if the noise is worse, increase the pressure by 1.0 mm (0.040 in.), keeping it away from the mounting bolts.

Related 2007 Chrysler Aspen Parts

Alternate Year Models

+
2008 Chrysler Aspen Power Steering Pump