How to Replace a Fog Light Bulb on 2007 Chrysler Pacifica?

Before applying the fog lamp bulb, be certain not to touch its glass with any finger grease to minimize its life. Push the bulb into the fog lamp unit and twist it clockwise 1/4 turn, not past the stop at the end. Attach the fog lamp electrical connector to socket number 2. If getting to the fog lamp bulb involved unfastening the lower section of the inner splash shield on the passenger side, fasten the splash shield again. After that, plug in the battery negative cable and secure the hood.

OEM 2007 Chrysler Pacifica Fog Light Bulb

Fog Lamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fog Light Bulb found

View related parts
2007 Chrysler Pacifica Fog Lamp Bulb, Front Part Number: L0009145
$24.74 MSRP: $36.50
You Save: $11.76 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Fog Light Bulb, Front; Fog Light Bulbs; Car Bulbs; Bulb Fog Lamp 50 Watt; Bulb 9145 Fog Lamp; Bulb 9145
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.0 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L0009145
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2007 Chrysler Pacifica Fog Light Bulb Parts and Q&A

Q: How to Replace a Fog Light Bulb on 2007 Chrysler Pacifica?
A: Before applying the fog lamp bulb, be certain not to touch its glass with any finger grease to minimize its life. Push the bulb into the fog lamp unit and twist it clockwise 1/4 turn, not past the stop at the end. Attach the fog lamp electrical connector to socket number 2. If getting to the fog lamp bulb involved unfastening the lower section of the inner splash shield on the passenger side, fasten the splash shield again. After that, plug in the battery negative cable and secure the hood.