How to Replace a Headlight Bulb on 2007 Dodge Caliber?

Do not remove the bulb before you harness the battery negative cable and raise the vehicle. Underneath the car in the proper wheel well, take the nuts off the front of your splash shield but leave it installed. The inboard headlight bulb required for replacement is inside the front wheel well; it is different from the outboard parking and turn signal bulb. Take out the electrical plug inside the bulb fixture. For export vehicles, slide out the rubber hood over the lamp housing and push the spring clip in first, then pull out the bulb straight backward. Finally, hold the bulb, turn it 1/4 turn to the left and take it out of the front lamp unit.

OEM 2007 Dodge Caliber Headlight Bulb

Headlamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Headlight Bulbs found

View related parts
2007 Dodge Caliber Headlamp Bulb, Rear Part Number: L002825W5W
$7.42 MSRP: $10.70
You Save: $3.28 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Center Stop; Turn/Parking; Plate; Side Marker; Daytime Running; Tail & Headlight; Tail Lamp Bulb; various exterior and interior bulbs including W5W and W10/5 types.
- Position: Rear
- Replaces: 153625, L2825W5WLL, 68317490AA, 5104608AA, 5104648AA, MS820090
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.8 x 2.0 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L002825W5W
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Headlamp Bulb, Front Part Number: L00H460W
$27.64 MSRP: $40.90
You Save: $13.26 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb - Headlamp; Headlight Bulb, Front; Headlight Bulbs; Car Bulbs; Socket; Bulb Headlamp
- Position: Front
- Replaces: 154893AA, L0000000H4
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.4 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L00H460W
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Turn Signal Bulb Part Number: 68604853AA
$12.60 MSRP: $18.45
You Save: $5.85 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Backup Lamp Bulb; Signal Lamp Bulb; Marker Lamp Bulb; Exterior Bulbs; Stoplamp Bulb; Taillamp Bulb; Bulbs
- Replaces: L0003757AK
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68604853AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Headlamp Bulb Part Number: 68604855AA
$29.76 MSRP: $44.10
You Save: $14.34 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; High Beam Bulb
- Replaces: L0000H13
- Item Weight: 1.30 Pounds
- Item Dimensions: 9.2 x 4.3 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68604855AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Dodge Caliber Headlight Bulb Parts and Q&A

Q: How to Replace a Headlight Bulb on 2007 Dodge Caliber?
A: Do not remove the bulb before you harness the battery negative cable and raise the vehicle. Underneath the car in the proper wheel well, take the nuts off the front of your splash shield but leave it installed. The inboard headlight bulb required for replacement is inside the front wheel well; it is different from the outboard parking and turn signal bulb. Take out the electrical plug inside the bulb fixture. For export vehicles, slide out the rubber hood over the lamp housing and push the spring clip in first, then pull out the bulb straight backward. Finally, hold the bulb, turn it 1/4 turn to the left and take it out of the front lamp unit.