How to Service a Front Cross-Member on 2007 Dodge Durango?

To service the front cross member, raise and support the vehicle. Remove bolts 1 and nuts 3 to remove crossmember 2 For the reinstallation, put crossmember 2 in position, tighten it with bolts 1 and nuts 3 to 102 N.m (75 ft.lbs.).

OEM 2007 Dodge Durango Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Front Cross-Member found

View related parts
2007 Dodge Durango Crossmember, Front Part Number: 52113572AA
Product Specifications
- Other Name: Crossmember - Front Suspension; Torsion Bar Mount, Front; Crossmember Front Suspension
- Position: Front
- Item Weight: 14.80 Pounds
- Item Dimensions: 34.7 x 6.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52113572AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2007 Dodge Durango Front Cross-Member Parts and Q&A

Q: How to Service a Front Cross-Member on 2007 Dodge Durango?
A: To service the front cross member, raise and support the vehicle. Remove bolts 1 and nuts 3 to remove crossmember 2 For the reinstallation, put crossmember 2 in position, tighten it with bolts 1 and nuts 3 to 102 N.m (75 ft.lbs.).