OEM 2007 Jeep Compass Fog Light Bulb

2007 Jeep Compass Fog Light Bulb Parts and Q&A

• Q: How to Correctly Replace a Fog Light Bulb on 2007 Jeep Compass?

  A: You should always insert a matching bulb to avoid overheating and damage to the lamp, the socket or the wires during use. Always keep the bulb glass away from your fingers or surfaces that are oily to avoid reducing the bulb's duration. Begin by positioning the bulb of the front fog lamp (4) into the keyed opening on the back of the housing (3) and press it in until it stays comfortably. One full turn clockwise should place the bulb securely, confirming the connector receptacle is inside and level to the ground. Join the engine compartment wire harness connector (1) with the bulb connector receptacle. Stack the front of the front wheel house splash shield (4) against the front fascia (2) closure panel and connect the two with two push pin fasteners (3). Attach the push pin fastener (3) on the inboard side of the splash shield to the front end metal. Fix the three screws (1) at the outboard edge of the splash shield to the front fascia, torquing them to 2 Nm (19 in. lbs.). Put the front wheel and tire back on, lower the car and attach the negative cable of the battery.