How to Install a Tail Light Unit on 2008 Chrysler Crossfire?

On installation, place the tail lamp unit in the rear body panel and secure with nuts tightened to 2 Nm (+/- 0.3 Nm) (18 in. lbs.). After that, link the harness to the connector and set the access panel into the interior trim panel in the rear cargo area. Once all is placed correctly, link the negative battery cable.

OEM 2008 Chrysler Crossfire Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tail Lights found

View related parts
2008 Chrysler Crossfire Tail Lamp Assembly, Rear Passenger Side Part Number: 5098677AA
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Rear Right; Back Up Light; Lamp Tail Stop Turn; Tail Light
- Position: Rear Passenger Side
- Item Weight: 3.70 Pounds
- Item Dimensions: 15.7 x 12.7 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098677AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2008 Chrysler Crossfire Tail Lamp Assembly, Rear Driver Side Part Number: 5098678AA
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Rear Left; Back Up Light; Lamp Tail Stop Turn; Tail Light
- Position: Rear Driver Side
- Item Weight: 3.80 Pounds
- Item Dimensions: 15.5 x 12.0 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098678AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2008 Chrysler Crossfire Tail Light Parts and Q&A

Q: How to Install a Tail Light Unit on 2008 Chrysler Crossfire?
A: On installation, place the tail lamp unit in the rear body panel and secure with nuts tightened to 2 Nm (+/- 0.3 Nm) (18 in. lbs.). After that, link the harness to the connector and set the access panel into the interior trim panel in the rear cargo area. Once all is placed correctly, link the negative battery cable.