How to Install a Rear Sway Bar Link on 2008 Chrysler Sebring?

Put the inboard stud part from the top of the sway bar link into the end of the sway bar and then attach nut 5, putting in 48 Nm (35 ft. lbs.) of torque while not moving the sway bar link stud. The underneath portion of your right side link's mounting stud should move toward the vehicle's front as it is lowered onto the front flange, but the left side link's remains pointing toward the vehicle's rear. Attach the sway bar link to the lower control arm, bolt it in place using nut 3 and tighten nut 2 to 48 Nm (35 ft. lbs.) while you keep the lower stud still. Lift the front end so you can let more air out until the car is down on its wheels.

OEM 2008 Chrysler Sebring Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Links found

View related parts
2008 Chrysler Sebring Stabilizer Link, Rear Part Number: 5174245AD
$51.75 MSRP: $76.90
You Save: $25.15 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar; Rear Suspension Stabilizer Bar Link Kit; Sway Bar Link Kit.; Link Kit; Link; Link Package Stabilizer Bar; Link Kit Stabilizer Bar; Suspension Stabilizer Bar Link
- Position: Rear
- Replaces: 5174245AE, 5174245AA, MN184194, 5174245AC, 5174245AB
- Item Weight: 1.00 Pounds
- Item Dimensions: 5.5 x 4.6 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5174245AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Chrysler Sebring Stabilizer Link, Front Part Number: 5174185AC
$38.46 MSRP: $94.50
You Save: $56.04 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar; Front Suspension Stabilizer Bar Link Kit; Sway Bar Link.; Link; Link Kit Stabilizer Bar; Suspension Stabilizer Bar Link
- Position: Front
- Replaces: 5174185AA, 5174185AB, MN101368
- Item Weight: 1.40 Pounds
- Item Dimensions: 16.2 x 5.2 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5174185AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2008 Chrysler Sebring Sway Bar Link Parts and Q&A

Q: How to Install a Rear Sway Bar Link on 2008 Chrysler Sebring?
A: Put the inboard stud part from the top of the sway bar link into the end of the sway bar and then attach nut 5, putting in 48 Nm (35 ft. lbs.) of torque while not moving the sway bar link stud. The underneath portion of your right side link's mounting stud should move toward the vehicle's front as it is lowered onto the front flange, but the left side link's remains pointing toward the vehicle's rear. Attach the sway bar link to the lower control arm, bolt it in place using nut 3 and tighten nut 2 to 48 Nm (35 ft. lbs.) while you keep the lower stud still. Lift the front end so you can let more air out until the car is down on its wheels.