How is a Wiper Motor Installed on 2008 Dodge Avenger?

To install the wiper motor, place it on the wiper module and tighten the retaining bolts to 9 Nm. Grease the ball stud, snap the wiper linkage onto the motor crank arm in the PARK position, connect the electrical connector, reconnect the battery, and cycle the motor before installing the wiper module.

OEM 2008 Dodge Avenger Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Motors found

View related parts
2008 Dodge Avenger Wiper Motor Part Number: 68044087AA
$165.02 MSRP: $247.00
You Save: $81.98 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Motor Windshield Wiper
- Item Weight: 4.30 Pounds
- Item Dimensions: 10.4 x 7.1 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68044087AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Avenger Submodels:
- Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
2008 Dodge Avenger Wiper Motor Part Number: 68003829AA
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Motor Windshield Wiper
- Item Weight: 3.30 Pounds
- Item Dimensions: 10.2 x 5.2 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003829AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Avenger Submodels:
- R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2008 Dodge Avenger Wiper Motor Parts and Q&A

Q: How is a Wiper Motor Installed on 2008 Dodge Avenger?
A: To install the wiper motor, place it on the wiper module and tighten the retaining bolts to 9 Nm. Grease the ball stud, snap the wiper linkage onto the motor crank arm in the PARK position, connect the electrical connector, reconnect the battery, and cycle the motor before installing the wiper module.