How to Detach a Sun Visor on 2008 Dodge Caliber?

In order to remove the sun visor, begin by unplugging it to the support. The second step is then to loosen the two screws that connect it to the roof panel before removing it through the headliner. Assuming there is a lit-up vanity mirror, do not forget to unplug the wire harness connector.

OEM 2008 Dodge Caliber Sun Visor

Sun Shade Visor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sun Visors found

View related parts
2008 Dodge Caliber Sunvisor, Passenger Side Part Number: 1DR32DW1AA
$81.58 MSRP: $103.42
You Save: $21.84 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Visor; Sun Visor, Right
- Position: Passenger Side
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1DR32DW1AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Caliber Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Dodge Caliber Sunvisor, Driver Side Part Number: 1DR33DW1AA
Product Specifications
- Other Name: Visor; Sun Visor, Left
- Position: Driver Side
- Item Weight: 1.60 Pounds
- Item Dimensions: 21.9 x 12.5 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1DR33DW1AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Caliber Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2008 Dodge Caliber Sun Visor Parts and Q&A

Q: How to Detach a Sun Visor on 2008 Dodge Caliber?
A: In order to remove the sun visor, begin by unplugging it to the support. The second step is then to loosen the two screws that connect it to the roof panel before removing it through the headliner. Assuming there is a lit-up vanity mirror, do not forget to unplug the wire harness connector.