How to Service and Repair Fuel Injectors on a 2.7L Engine on 2008 Dodge Charger?

To service fuel injectors on a 2.7L engine, relieve fuel pressure, disconnect the battery and remove the intake manifold. Label, if not already labeled, tag injector connectors, then remove electrical connectors and fuel rail bolts. Lift the fuel rail, remove injectors and examine O-rings and clips for damage and replace as needed.

OEM 2008 Dodge Charger Fuel Injector

Gas Injector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Injectors found

View related parts
2008 Dodge Charger Injector Part Number: 4591986AA
$115.45 MSRP: $151.00
You Save: $35.55 (24%)
ADD TO CART
Product Specifications
- Other Name: Injector - Fuel; Gasoline Injector; Fuel Injector; Injector Fuel
- Replaces: RL591986AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4591986AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, Pursuit, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Charger Injector Part Number: 4591851AB
Product Specifications
- Other Name: Injector - Fuel; Fuel Injector; Injector Fuel
- Replaces: 4591851AA, RL591851AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.7 x 1.7 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4591851AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Daytona R/T, Pursuit, R/T, SE | 5.7L V8, 8 Cyl 5.7 L GAS

2008 Dodge Charger Fuel Injector Parts and Q&A

Q: How to Service and Repair Fuel Injectors on a 2.7L Engine on 2008 Dodge Charger?
A: To service fuel injectors on a 2.7L engine, relieve fuel pressure, disconnect the battery and remove the intake manifold. Label, if not already labeled, tag injector connectors, then remove electrical connectors and fuel rail bolts. Lift the fuel rail, remove injectors and examine O-rings and clips for damage and replace as needed.