How to Remove and Replace the Upper Intake Manifold on 2008 Dodge Charger?

To start the process, unhook the negative terminal on your car battery. After that, unclip the throttle body air inlet hose and take out the air cleaner housing assembly. Separate the electrical connections from the Manifold Absolute Pressure (MAP) Sensor, Electronic Throttle Control and Manifold Tuning Valve. After that, remove the Vapor Purge hose, Brake Booster hose and Positive Crankcase Ventilation (PCV) hose. Take off the manifold support brackets and the upper EGR tube from each the intake manifold and the EGR valve. Once those steps are done, get rid of the manifold bolts and take the upper manifold out. After that, remove the foam cover and check the manifold.

OEM 2008 Dodge Charger Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Intake Manifolds found

View related parts
2008 Dodge Charger Intake Plenum, Upper Part Number: 4591863AM
$1121.58 MSRP: $1705.00
You Save: $583.42 (35%)
ADD TO CART
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Plenum; Plenum Intake Manifold; Intake Manifold
- Position: Upper
- Replaces: 4591863AL
- Item Weight: 22.20 Pounds
- Item Dimensions: 35.0 x 29.1 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4591863AM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Pursuit, SE, SXT | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Charger Intake Manifold, Lower Part Number: 4591960AC
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower; Manifold Intake
- Position: Lower
- Item Weight: 3.10 Pounds
- Item Dimensions: 24.2 x 6.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4591960AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, SE | 6 Cyl 2.7 L GAS
View related parts
2008 Dodge Charger Intake Manifold Part Number: 4591846BA
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake Includes All Parts Listed Below; Manifold Intake
- Replaces: 4591846AK
- Item Weight: 23.40 Pounds
- Item Dimensions: 29.2 x 20.1 x 10.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4591846BA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Pursuit, R/T, SE | 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Charger Intake Plenum, Upper Part Number: 4591862AK
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Plenum
- Position: Upper
- Replaces: 4591862AI, 4591862AJ
- Item Weight: 17.30 Pounds
- Item Dimensions: 33.3 x 29.9 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4591862AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- SE | 2.7L V6, 6 Cyl 2.7 L GAS
View related parts
2008 Dodge Charger Intake Plenum, Upper Part Number: 68017975AA
$398.46 MSRP: $580.00
You Save: $181.54 (32%)
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Plenum
- Position: Upper
- Replaces: 4591863AH, 4591863AI, 4591863AK
- Item Weight: 23.50 Pounds
- Item Dimensions: 28.8 x 27.6 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68017975AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, Pursuit, SE, SXT | 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Charger Intake Manifold, Lower Part Number: 4792184AE
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower, Upper; Manifold Intake
- Position: Lower
- Item Weight: 8.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792184AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, Pursuit, SE, SXT | 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Charger Intake Manifold Part Number: 5037510AK
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold
- Replaces: 5037510AJ, 5037510AH, 5037510AG, 5037510AI
- Item Weight: 36.80 Pounds
- Item Dimensions: 25.5 x 18.0 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037510AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS

2008 Dodge Charger Intake Manifold Parts and Q&A

Q: How to Remove and Replace the Upper Intake Manifold on 2008 Dodge Charger?
A: To start the process, unhook the negative terminal on your car battery. After that, unclip the throttle body air inlet hose and take out the air cleaner housing assembly. Separate the electrical connections from the Manifold Absolute Pressure (MAP) Sensor, Electronic Throttle Control and Manifold Tuning Valve. After that, remove the Vapor Purge hose, Brake Booster hose and Positive Crankcase Ventilation (PCV) hose. Take off the manifold support brackets and the upper EGR tube from each the intake manifold and the EGR valve. Once those steps are done, get rid of the manifold bolts and take the upper manifold out. After that, remove the foam cover and check the manifold.