How is a Lash Adjuster Installed on 2008 Dodge Charger?

To install the hydraulic lash adjuster, verify that the adjusters contain some oil, indicated by slight plunger movement when pressed. Then, proceed to install the rocker arm(s) and the cylinder head covers.

OEM 2008 Dodge Charger Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Lash Adjusters found

View related parts
2008 Dodge Charger Valve Lifters Part Number: 4663985
$37.74 MSRP: $56.00
You Save: $18.26 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve Lash; Engine Valve Lifter; Valve Lifter; Adjuster Valve Lash
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.7 x 0.8 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663985
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, SE | 6 Cyl 2.7 L GAS
View related parts
2008 Dodge Charger Valve Lifters Part Number: 5038784AD
$154.09 MSRP: $229.00
You Save: $74.91 (33%)
Product Specifications
- Other Name: Tappet - Hydraulic; Valve Lifter; Yoke; Lifters And Yoke Hydraulic Engine
- Replaces: 53021720AD, 5038784AA, 5038784AC, 53021720AE, 5038784AB, 53021720AB, 53021720AC, 5038686AA
- Item Weight: 5.00 Pounds
- Item Dimensions: 8.1 x 3.9 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5038784AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS

2008 Dodge Charger Lash Adjuster Parts and Q&A

Q: How is a Lash Adjuster Installed on 2008 Dodge Charger?
A: To install the hydraulic lash adjuster, verify that the adjusters contain some oil, indicated by slight plunger movement when pressed. Then, proceed to install the rocker arm(s) and the cylinder head covers.