Other Name: Cover - Front Seat Cushion; Seat Cushion Cover, Front Center; Seat Cushion Cover, Front Left; Seat Cover, Front Left; Center Cover; Cover Front Seat Cushion 20%; Cover Front Seat Cushion
Position: Front Driver Side
Item Weight: 1.30 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 1JM851D5AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Dakota Submodels:
Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX
Other Name: Cover - Front Seat Cushion; Seat Cushion Cover, Front Right; Seat Cover, Front Right
Position: Front Passenger Side
Replaces: 1JL211DVAA
Item Weight: 2.20 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 1JL21XDVAA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Dakota Submodels:
Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX
| Page 1 of 4 |Next >
1-20 of 70 Results
2008 Dodge Dakota Seat Cover Parts and Q&A
Q: How to Install a Seat Cover and Seat Cushion on 2008 Dodge Dakota?
A: Before putting on the seat cushion and cover, make sure to look over the warnings and cautions. Put the foam and then the cushion cover onto the seat pan and attach the j-straps. After that, put the seat cushion assembly onto the seat frame and attach the clamps. If vehicle lights are available, attach the wire harness to the back of the seat cushion pan. Secure the bolts to 10 Nm (90 in. lbs.), finish the installation with the battery negative cable.