How to Maintain the Seat Heater Switch in the 2nd Row on 2008 Dodge Durango?

The seat heater switch for the 2nd row should be serviced after the negative battery cable is removed and the circuit is isolated. Once it's hot, take a proper flat bladed tool and carefully lift the heated seat switch/modules out of the rear center floor console, being cautious not to mark or hurt the console or its bezel. Open each switch electrical connector to separate it from power. Last, carefully move the flat bladed tool to extract the heated seat switch/module from the bezel.

OEM 2008 Dodge Durango Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heater Switches found

View related parts
2008 Dodge Durango Seat Switch, Rear Driver Side Part Number: 56040639AF
$68.68 MSRP: $95.30
You Save: $26.62 (28%)
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Heater Switch (Ctr R/L, Frt R/L, Rear L, Rt), Power Switch (Left); Seat Heat Switch; Switch
- Position: Rear Driver Side
- Replaces: 56040639AD, 56040639AE
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56040639AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Durango Seat Switch, Center Driver Side Part Number: 56040688AF
$69.80 MSRP: $106.00
You Save: $36.20 (35%)
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Center Right, Center Left, Front Right, Front Left, Rear Right, Left.; Seat Heat Switch; Switch
- Position: Center Driver Side
- Replaces: 56040688AE, 56040688AD
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56040688AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2008 Dodge Durango Seat Heater Switch Parts and Q&A

Q: How to Maintain the Seat Heater Switch in the 2nd Row on 2008 Dodge Durango?
A: The seat heater switch for the 2nd row should be serviced after the negative battery cable is removed and the circuit is isolated. Once it's hot, take a proper flat bladed tool and carefully lift the heated seat switch/modules out of the rear center floor console, being cautious not to mark or hurt the console or its bezel. Open each switch electrical connector to separate it from power. Last, carefully move the flat bladed tool to extract the heated seat switch/module from the bezel.