How to Install a Washer Reservoir on 2008 Dodge Grand Caravan?

Push the filler neck and front hose up through the front fender's opening and place the reservoir on the attached mount from below. Apply 8.5 - 11.3 Nm (75 - 100 in. lbs.) torque to the two reservoir screws and match connect the electrical body harness to the washer pump and fluid level sensor, with the red lock in the closed position. Guide the washer wires carefully so they do not become pinched and will continue to work. After that, put in the left and right front wheelhouse splash shield and assemble the right front wheel and tire. After lowering the car from the hoist or jack stands, attach the filler tube with a screw that is tightened to 8.5 - 11.3 Nm (75 - 100 in. lbs.). Attach the hose onto the clip on the front fender side of the shield, join the battery negative cable and make sure the system is running as it should.

OEM 2008 Dodge Grand Caravan Washer Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Washer Reservoirs found

View related parts
2008 Dodge Grand Caravan Washer Reservoir Part Number: 68028584AA
$78.06 MSRP: $110.00
You Save: $31.94 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Windshield Washer; Windshield Washer Reservoir; Reservoir Windshield Washer
- Item Weight: 1.70 Pounds
- Item Dimensions: 8.5 x 5.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68028584AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
- C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Dodge Grand Caravan Washer Reservoir Part Number: 68125514AA
$113.42 MSRP: $171.00
You Save: $57.58 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir; Reservoir Windshield Washer
- Item Weight: 1.70 Pounds
- Item Dimensions: 7.2 x 12.9 x 22.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68125514AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
- American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Dodge Grand Caravan Washer Reservoir Part Number: 68028581AA
$84.68 MSRP: $176.00
You Save: $91.32 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir Windshield Washer
- Item Weight: 1.70 Pounds
- Item Dimensions: 22.0 x 12.2 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68028581AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
- C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Dodge Grand Caravan Washer Reservoir Parts and Q&A

Q: How to Install a Washer Reservoir on 2008 Dodge Grand Caravan?
A: Push the filler neck and front hose up through the front fender's opening and place the reservoir on the attached mount from below. Apply 8.5 - 11.3 Nm (75 - 100 in. lbs.) torque to the two reservoir screws and match connect the electrical body harness to the washer pump and fluid level sensor, with the red lock in the closed position. Guide the washer wires carefully so they do not become pinched and will continue to work. After that, put in the left and right front wheelhouse splash shield and assemble the right front wheel and tire. After lowering the car from the hoist or jack stands, attach the filler tube with a screw that is tightened to 8.5 - 11.3 Nm (75 - 100 in. lbs.). Attach the hose onto the clip on the front fender side of the shield, join the battery negative cable and make sure the system is running as it should.